| title | ISBN-13 | year of publication |
|---|
| 2001 ASME Boiler & Pressure Vessel Code VI | 978-0-7918-2697-3 | 2001 |
| ANSI/ASME B16.34-2004: Valves û Flanged, Threaded, and Welding End | 978-0-7918-2860-1 | 2008 |
| ANSI/ASME B30.5-2004: Mobile and Locomotive Cranes | 978-0-7918-2904-2 | 2007 |
| ANSI/ASME NQA-1-2008: Quality Assurance Requirements for Nuclear Facility Applications | 978-0-7918-3127-4 | 2008 |
| ANSI/ASME PTC 30-1991: Air Cooled Heat Exchangers | 978-0-7918-2073-5 | 2012 |
| API 579-2/ASME FFS-2-2009: Fitness-for-Service Example Problem Manual | 978-0-7918-3151-9 | 2010 |
| ASME A17.1-2010/CSA B44-10: Safety Code for Elevators and Escalators | 978-0-7918-3311-7 | 2011 |
| ASME A17.1-2013/CSA B44-13: Safety Code for Elevators and Escalators | 978-0-7918-6857-7 | 2013 |
| ASME A17.2-2012: Guide for Inspection of Elevators, Escalators, and Moving Walks | 978-0-7918-3429-9 | 2012 |
| ASME A17.2-2014: Guide for Inspection of Elevators, Escalators, and Moving Walks | 978-0-7918-6958-1 | 2015 |
| ASME A17.2-2017: Guide for Inspection of Elevators, Escalators, and Moving Walks | 978-0-7918-7164-5 | 2018 |
| ASME A17.3-2017: Safety Code for Existing Elevators and Escalators: Includes Requirements for Electric and Hydraulic Elevators and Escalators | 978-0-7918-7196-6 | 2018 |
| ASME A17.4-2015: Guide for Emergency Personnel: Includes Evacuation Procedures and Firefighters' Service Operating Procedures | 978-0-7918-6967-3 | 2015 |
| ASME A17.5-2011: Elevator and Escalator Electrical Equipment | 978-0-7918-3371-1 | 2011 |
| ASME A17.7-2007/CSA B44.7-07: Performance-Based Safety Code for Elevators and Escalators | 978-0-7918-3099-4 | 2017 |
| ASME A17.8-2016/CSA B44.8-16: Standard for wind turbine tower elevators | 978-0-7918-7061-7 | 2016 |
| ASME A18.1-2014: Safety Standard for Platform Lifts and Stairway Chairlifts | 978-0-7918-6942-0 | 2014 |
| ASME A18.1-2017: Safety Standard for Platform Lifts and Stairway Chairlifts | 978-0-7918-7161-4 | 2017 |
| ASME A90.1-2015: Safety Standard for Belt Manlifts | 978-0-7918-7011-2 | 2015 |
| ASME A112.3.4-2013/CSA B45.9-13: Plumbing Fixtures with Pumped Waste and Macerating Toilet Systems | 978-0-7918-6917-8 | 2014 |
| ASME A112.6.1M-1997: Floor Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use | 978-0-7918-2467-2 | 1997 |
| ASME A112.14.3-2018: Hydromechanical Grease Interceptors | 978-0-7918-7181-2 | 2018 |
| ASME A112.18.2-2011/CSA B125.2-11: Plumbing Waste Fittings | 978-0-7918-3177-9 | 2012 |
| ASME A112.18.2-2015: Plumbing Waste Fittings | 978-0-7918-7045-7 | 2016 |
| ASME A112.18.3-2002: Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings | 978-0-7918-2803-8 | 2003 |
| ASME A112.18.6-2009/CSA B125.6-09: Flexible Water Connectors | 978-0-7918-3220-2 | 2009 |
| ASME A112.18.6/CSA B125.6-17-2017: Flexible Water Connectors | 978-0-7918-7184-3 | 2017 |
| ASME A112.19.1-2013/CSA B45.2-13: Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures | 978-0-7918-6909-3 | 2013 |
| ASME A112.19.2-2018/CSA B45.1-18: Ceramic Plumbing Fixtures | 978-0-7918-7246-8 | 2018 |
| ASME A112.19.3/CSA B45.4-2008: Stainless Steel Plumbing Fixtures | 978-0-7918-3173-1 | 2008 |
| ASME A112.19.5-2011/CSA B45.15-11: Flush Valves and Spuds for Water Closets, Urinals, and Tanks | 978-0-7918-3402-2 | 2012 |
| ASME A112.19.7-2012/CSA B45.10-2012: Hydromassage Bathtub Systems | 978-0-7918-3420-6 | 2012 |
| ASME A120.1-2008: Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance | 978-0-7918-3146-5 | 2008 |
| ASME AG-1-2009: Code on Nuclear Air and Gas Treatment | 978-0-7918-3180-9 | 2009 |
| ASME AG-1-2012: Code on Nuclear Air and Gas Treatment | 978-0-7918-3488-6 | 2013 |
| ASME AG-1-2015: Code on Nuclear Air and Gas Treatment | 978-0-7918-6955-0 | 2015 |
| ASME AG-1-2017: Code on Nuclear Air and Gas Treatment | 978-0-7918-7168-3 | 2018 |
| ASME ANDE-1-2015: ASME Nondestructive Examination and Quality Control Central Qualification and Certification Program | 978-0-7918-7021-1 | 2015 |
| ASME/ANS RA-S-1.4-2013: Probabilistic Risk Assessment Standard for Advanced Non-LWR Nuclear Power Plants | 978-0-7918-6924-6 | 2013 |
| ASME ASP-2010: Safety Standard for Automotive Service and Maintenance Products | 978-0-7918-3301-8 | 2010 |
| ASME B1.1-2003: Unified Inch Screw Threads, | 978-0-7918-2833-5 | 2004 |
| ASME B1.3-2007: Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads | 978-0-7918-3090-1 | 2007 |
| ASME B1.10M-2004: Unified Miniature Screw Threads | 978-0-7918-2900-4 | 2004 |
| ASME B1.13M-2005: Metric Screw Threads: M Profile | 978-0-7918-2995-0 | 2006 |
| ASME B1.15-1995: Unified Inch Screw Threads | 978-0-7918-2245-6 | 2003 |
| ASME B1.20.1-2013: Pipe Threads, General Purpose, Inch | 978-0-7918-6886-7 | 2013 |
| ASME B1.30-2002: Screw Threads: Standard Practice for Calculating and Rounding Dimensions | 978-0-7918-2778-9 | 2003 |
| ASME B5.50-2009: 7/24 Taper Tool to Spindle Connection for Automatic Tool Change | 978-0-7918-3214-1 | 2009 |
| ASME B5.52-2003: Power Presses: General Purpose, Single-Point Gap Type | 978-0-7918-2851-9 | 2014 |
| ASME B5.57-2012: Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers | 978-0-7918-3499-2 | 2013 |
| ASME B5.60-2014: Workholding Chucks: Jaw-Type Chucks | 978-0-7918-6964-2 | 2015 |
| ASME B5.61-2003: Power Presses - General Purpose Single Action Straight Side Type | 978-0-7918-2852-6 | 2008 |
| ASME B5.62M-2016: Hollow Taper Tooling with Flange-Face Contact | 978-0-7918-7055-6 | 2016 |
| ASME B16.1-2010: Gray Iron Pipe Flanges and Flanged Fittings | 978-0-7918-3335-3 | 2011 |
| ASME B16.1-2015: Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 | 978-0-7918-7049-5 | 2015 |
| ASME B16.3-2011: Malleable Iron Threaded Fittings: Classes 150 and 300 | 978-0-7918-3381-0 | 2011 |
| ASME B16.3-2016: Malleable Iron Threaded Fittings: Classes 150 and 300 | 978-0-7918-7131-7 | 2016 |
| ASME B16.4-2011: Gray Iron Threaded Fittings: Classes 125 and 250 | 978-0-7918-3382-7 | 2011 |
| ASME B16.4-2016: Gray Iron Threaded Fittings Classes 125 and 250 | 978-0-7918-7128-7 | 2016 |
| ASME B16.5-2009: Pipe Flanges and Flanged Fittings: NPS 1/2 through 24 - Metric/Inch Standard | 978-0-7918-3199-1 | 2009 |
| ASME B16.5-2013: Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard | 978-0-7918-3491-6 | 2013 |
| ASME B16.5-2017: Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard | 978-0-7918-7145-4 | 2017 |
| ASME B16.9-2012: Factory-Made Wrought Buttwelding Fittings | 978-0-7918-3494-7 | 2013 |
| ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings | 978-0-7918-7209-3 | 2018 |
| ASME B16.10-2009: Face-to-Face and End-to-End Dimensions of Valves | 978-0-7918-3216-5 | 2009 |
| ASME B16.10-2017: Face-to-Face and End-to-End Dimensions of Valves | 978-0-7918-7147-8 | 2017 |
| ASME B16.11-2009: Forged Fittings, Socket-Welding and Threaded | 978-0-7918-3217-2 | 2009 |
| ASME B16.11-2011: Forged Fittings, Socket-Welding and Threaded | 978-0-7918-3401-5 | 2012 |
| ASME B16.11-2016: Forged Fittings, Socket-Welding and Threaded | 978-0-7918-7138-6 | 2017 |
| ASME B16.12-2009: Cast Iron Threaded Drainage Fittings | 978-0-7918-3195-3 | 2009 |
| ASME B16.14-2013: Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads | 978-0-7918-6891-1 | 2013 |
| ASME B16.14-2018: Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads | 978-0-7918-7235-2 | 2018 |
| ASME B16.15-2013: Cast Copper Alloy Threaded Fittings: Classes 125 and 250: Classes 125 and 250 | 978-0-7918-6892-8 | 2013 |
| ASME B16.18-2012: Cast Copper Alloy Solder Joint Pressure Fittings | 978-0-7918-3396-4 | 2012 |
| ASME B16.18-2018: Cast Copper Alloy Solder Joint Pressure Fittings | 978-0-7918-7207-9 | 2018 |
| ASME B16.20-2012: Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed | 978-0-7918-3490-9 | 2013 |
| ASME B16.20-2017: Metallic Gaskets for Pipe Flanges | 978-0-7918-7192-8 | 2017 |
| ASME B16.21-2011: Nonmetallic Flat Gaskets for Pipe Flanges | 978-0-7918-3344-5 | 2011 |
| ASME B16.21-2016: Nonmetallic Flat Gaskets for Pipe Flanges | 978-0-7918-7144-7 | 2016 |
| ASME B16.22-2013: Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings | 978-0-7918-6893-5 | 2013 |
| ASME B16.22-2018: Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings | 978-0-7918-7237-6 | 2018 |
| ASME B16.23-2011: Cast Copper Alloy Solder Joint Drainage Fittings: DWV | 978-0-7918-3389-6 | 2012 |
| ASME B16.23-2016: Cast Copper Alloy Solder Joint Drainage Fittings: DWV | 978-0-7918-7139-3 | 2017 |
| ASME B16.24-2011: Cast Copper Alloy Pipe Flanges and Flanged Fittings | 978-0-7918-3390-2 | 2011 |
| ASME B16.24-2016: Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500 | 978-0-7918-7129-4 | 2016 |
| ASME B16.25-2007: Buttwelding Ends | 978-0-7918-3111-3 | 2008 |
| ASME B16.25-2012: Buttwelding Ends | 978-0-7918-3495-4 | 2012 |
| ASME B16.25-2017: Buttwelding Ends | 978-0-7918-7189-8 | 2017 |
| ASME B16.26-2013: Cast Copper Alloy Fittings for Flared Copper Tubes | 978-0-7918-6894-2 | 2013 |
| ASME B16.29-2012: Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings-DWV | 978-0-7918-3440-4 | 2012 |
| ASME B16.29-2017: Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV | 978-0-7918-7188-1 | 2017 |
| ASME B16.34-2009: Valves -Flanged, Threaded, and Welding End | 978-0-7918-3223-3 | 2009 |
| ASME B16.34-2013: Valves - Flanged, Threaded, and Welding End | 978-0-7918-3492-3 | 2013 |
| ASME B16.34-2017: Valves - Flanged, Threaded, and Welding End | 978-0-7918-7142-3 | 2017 |
| ASME B16.36-2009: Orifice Flanges | 978-0-7918-3226-4 | 2009 |
| ASME B16.36-2015: Orifice Flanges | 978-0-7918-7016-7 | 2015 |
| ASME B16.39-2014: Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300 | 978-0-7918-6963-5 | 2014 |
| ASME B16.42-2011: Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 | 978-0-7918-3384-1 | 2011 |
| ASME B16.42-2016: Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 | 978-0-7918-7130-0 | 2016 |
| ASME B16.44-2012: Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems up to 5 psi | 978-0-7918-3438-1 | 2012 |
| ASME B16.47-2006: Large Diameter Steel Flanges -NPS 26 Through NPS 60 Metric/Inch Standard | 978-0-7918-3087-1 | 2007 |
| ASME B16.47-2011: Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard | 978-0-7918-3377-3 | 2011 |
| ASME B16.47-2017: Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard | 978-0-7918-7146-1 | 2017 |
| ASME B16.48-2010: Line Blanks | 978-0-7918-3327-8 | 2010 |
| ASME B16.48-2015: Line Blanks | 978-0-7918-7053-2 | 2015 |
| ASME B16.49-2007: Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems | 978-0-7918-3124-3 | 2008 |
| ASME B16.49-2012: Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems | 978-0-7918-3496-1 | 2013 |
| ASME B16.49-2017: Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems | 978-0-7918-7185-0 | 2017 |
| ASME B16.50-2013: Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings | 978-0-7918-6888-1 | 2013 |
| ASME B16.50-2018: Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings | 978-0-7918-7230-7 | 2018 |
| ASME B16.51-2013: Copper and Copper Alloy Press-Connect Pressure Fittings | 978-0-7918-6895-9 | 2013 |
| ASME B16.51-2018: Copper and Copper Alloy Press-Connect Pressure Fittings | 978-0-7918-7239-0 | 2018 |
| ASME B16.52-2018: Forged Nonferrous Fittings, Socket-Welding and Threaded | 978-0-7918-7210-9 | 2018 |
| ASME B18.2.1-2012: Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws | 978-0-7918-3498-5 | 2013 |
| ASME B18.2.2-2015: Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts | 978-0-7918-7032-7 | 2015 |
| ASME B18.2.3.4M-2001: Metric Hex Flange Screws | 978-0-7918-2714-7 | 2002 |
| ASME B18.2.5M-2013: Metric 12-Point Flange Head Screws | 978-0-7918-6862-1 | 2013 |
| ASME B18.3-2012: Socket Cap, Shoulder, Set Screws, and Hex Keys | 978-0-7918-3483-1 | 2013 |
| ASME B18.5-2012: Round Head Bolts | 978-0-7918-3424-4 | 2012 |
| ASME B18.6.3-2013: Machine Screws, Tapping Screws, and Metallic Drive Screws | 978-0-7918-6852-2 | 2013 |
| ASME B18.6.4-1998: Thread Forming And Thread Cutting Tapping Screws And Metallic Drive Screws - Inch | 978-0-7918-2555-6 | 2008 |
| ASME B18.6.8-2010: Thumb Screws and Wing Screws | 978-0-7918-3291-2 | 2010 |
| ASME B18.6.9-2010: Wing Nuts | 978-0-7918-3292-9 | 2010 |
| ASME B18.9-2012: Plow Bolts | 978-0-7918-3425-1 | 2012 |
| ASME B18.12-2012: Glossary of Terms for Mechanical Fasteners | 978-0-7918-3405-3 | 2012 |
| ASME B18.13.1M-2011: Screw and Washer Assemblies: SEMS | 978-0-7918-3375-9 | 2011 |
| ASME B18.13-1996: Screws And Washer AssembliesùSems | 978-0-7918-2346-0 | 2015 |
| ASME B18.13-2017: 2017 Screw and Washer Assemblies--SEMS | 978-0-7918-7113-3 | 2017 |
| ASME B18.16.6-2014: Prevailing Torque Locknuts | 978-0-7918-6922-2 | 2014 |
| ASME B18.16.6-2017: Prevailing Torque Locknuts | 978-0-7918-7066-2 | 2017 |
| ASME B18.18-2011: Quality Assurance for Fasteners | 978-0-7918-3342-1 | 2011 |
| ASME B18.21.1-2009: Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers : Helical Spring-Lock, Tooth Lock, and Plain Washers | 978-0-7918-3266-0 | 2010 |
| ASME B18.24-2015: Part Identifying Number Code System Standard for B18 Fastener Products | 978-0-7918-7017-4 | 2015 |
| ASME B18.29.1-2010: Helical Coil Screw Thread Inserts - Free Running and Screw Locking | 978-0-7918-3297-4 | 2010 |
| ASME B18.29.2M-2005: Helical Coil Screw Thread Inserts - Free Running and Screw Locking | 978-0-7918-2973-8 | 2006 |
| ASME B18.31.5-2011: Bent Bolts | 978-0-7918-3394-0 | 2011 |
| ASME B20.1-2012: Safety Standard for Conveyors and Related Equipment | 978-0-7918-3411-4 | 2012 |
| ASME B20.1-2015: Safety Standard for Conveyors and Related Equipment: Safety Standard for Conveyors and Related Equipment | 978-0-7918-7034-1 | 2015 |
| ASME B20.1-2018: Safety Standard for Conveyors and Related Equipment: 8.2 | 978-0-7918-7221-5 | 2018 |
| ASME B29.2M-2007: Inverted Tooth Chains and Sprockets | 978-0-7918-3045-1 | 2007 |
| ASME B29.26-2013: Fatigue Testing Power Transmission Roller Chain | 978-0-7918-6904-8 | 2013 |
| ASME B29.28-2015: High-Strength Chains for Power Transmission and Tension Linkages | 978-0-7918-7042-6 | 2015 |
| ASME B29.100-2011: Double-Pitch Roller Chains, Attachments, and Sprockets | 978-0-7918-3397-1 | 2012 |
| ASME B29.200-2001: Welded-Steel-Type Mill Chains, Welded-Steel-Type Drag Chains, Attachments, and Sprocket Teeth | 978-0-7918-2757-4 | 2002 |
| ASME B29.300-2015: Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets | 978-0-7918-7044-0 | 2015 |
| ASME B30.1-2009: Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3222-6 | 2009 |
| ASME B30.1-2015: Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7006-8 | 2015 |
| ASME B30.2-2005: Overhead and Gantry Cranes | 978-0-7918-2985-1 | 2008 |
| ASME B30.2-2011: Overhead and Gantry Cranes | 978-0-7918-3340-7 | 2011 |
| ASME B30.2-2016: Overhead and Gantry Cranes - Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, & Slings | 978-0-7918-7123-2 | 2017 |
| ASME B30.3-2012: Tower Cranes | 978-0-7918-3449-7 | 2013 |
| ASME B30.3-2016: Tower Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7062-4 | 2016 |
| ASME B30.4-2010: Portal and Pedestal Cranes | 978-0-7918-3289-9 | 2010 |
| ASME B30.4-2015: Portal and Pedestal Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7013-6 | 2015 |
| ASME B30.5-2011: Mobile and Locomotive Cranes | 978-0-7918-3358-2 | 2012 |
| ASME B30.5-2014: Mobile and Locomotive Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6940-6 | 2014 |
| ASME B30.7-2016: Winches: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7118-8 | 2016 |
| ASME B30.8-2004: Floating Cranes and Floating Derricks | 978-0-7918-2910-3 | 2008 |
| ASME B30.8-2010: Floating Cranes and Floating Derricks | 978-0-7918-3272-1 | 2010 |
| ASME B30.8-2015: Floating Cranes and Floating Derricks -Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7009-9 | 2015 |
| ASME B30.9-2014: Slings: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6961-1 | 2015 |
| ASME B30.9-2018: Slings: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, & Slings | 978-0-7918-7202-4 | 2018 |
| ASME B30.10-2014: Hooks: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6933-8 | 2014 |
| ASME B30.11-2004: Monorails and Underhung Cranes | 978-0-7918-2936-3 | 2008 |
| ASME B30.11-2010: Monorails and Underhung Cranes -Safety Standard for Cableways, Cranes,Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3277-6 | 2010 |
| ASME B30.12-2011: Handling Loads Suspended from Rotorcraft: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3395-7 | 2012 |
| ASME B30.13-2011: Storage/Retrieval Machines and Associated Equipment | 978-0-7918-3393-3 | 2012 |
| ASME B30.13-2017: Storage/Retrieval Machines and Associated Equipment: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks and Slings | 978-0-7918-7151-5 | 2017 |
| ASME B30.14-2004: Side Boom Tractors | 978-0-7918-2908-0 | 2008 |
| ASME B30.14-2010: Side Boom Tractors - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3315-5 | 2010 |
| ASME B30.14-2015: Side Boom Tractors: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks and Slings | 978-0-7918-7030-3 | 2015 |
| ASME B30.16-2012: Overhead Hoists | 978-0-7918-3437-4 | 2012 |
| ASME B30.16-2017: Overhead Underhung and Stationary Hoists: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7167-6 | 2017 |
| ASME B30.17-2015: Cranes and Monorails : Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks and Slings | 978-0-7918-7048-8 | 2016 |
| ASME B30.18-2004: Stacker Cranes | 978-0-7918-2909-7 | 2008 |
| ASME B30.18-2011: Stacker Cranes | 978-0-7918-3346-9 | 2011 |
| ASME B30.18-2016: Stacker Cranes - Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist | 978-0-7918-7114-0 | 2016 |
| ASME B30.19-2011: Safety Standard For Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, And Slings | 978-0-7918-3337-7 | 2011 |
| ASME B30.19-2016: Safety Standard For Cableways, Cranes, Derricks Hoists, Hooks, Jacks, And Slings: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7110-2 | 2016 |
| ASME B30.20-2010: Below-the-Hook Lifting Devices - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3303-2 | 2010 |
| ASME B30.21-2005: Manually Lever Operated Hoists | 978-0-7918-2956-1 | 2008 |
| ASME B30.21-2014: Lever Hoists: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6921-5 | 2014 |
| ASME B30.22-2010: Articulating Boom Cranes | 978-0-7918-3321-6 | 2010 |
| ASME B30.22-2016: Articulating Boom Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7052-5 | 2016 |
| ASME B30.23-2005: Personnel Lifting Systems | 978-0-7918-2957-8 | 2008 |
| ASME B30.23-2011: Personnel Lifting Systems | 978-0-7918-3367-4 | 2011 |
| ASME B30.23-2016: Personnel Lifting Systems: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7133-1 | 2016 |
| ASME B30.24-2008: Container Cranes | 978-0-7918-3130-4 | 2008 |
| ASME B30.24-2013: Container Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6863-8 | 2013 |
| ASME B30.25-2013: Scrap and Material Handlers | 978-0-7918-6856-0 | 2013 |
| ASME B30.25-2018: Scrap and Material Handlers | 978-0-7918-7222-2 | 2018 |
| ASME B30.26-2010: Rigging Hardware -Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3295-0 | 2010 |
| ASME B30.26-2015: Rigging Hardware: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7023-5 | 2015 |
| ASME B30.27-2014: Material Placement Systems: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-6918-5 | 2014 |
| ASME B30.28-2010: Balance Lifting Units Safety Standard for Cableways, Cranes,Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-3317-9 | 2010 |
| ASME B30.28-2015: Balance Lifting Units | 978-0-7918-7047-1 | 2015 |
| ASME B30.29-2012: Self-Erecting Tower Cranes | 978-0-7918-3444-2 | 2013 |
| ASME B30.29-2018: Self-Erecting Tower Cranes: Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings | 978-0-7918-7193-5 | 2018 |
| ASME B31.1-2010: Power Piping | 978-0-7918-3304-9 | 2010 |
| ASME B31.1-2016: Power Piping: ASME Code for Pressure Piping, B31 | 978-0-7918-7072-3 | 2016 |
| ASME B31.3-2014: Process Piping | 978-0-7918-6939-0 | 2015 |
| ASME B31.4-2012: Pipeline Transportation Systems for Liquids and Slurries | 978-0-7918-3432-9 | 2012 |
| ASME B31.4-2016 Transportation Systems for Liquids and Slurries: ASME Code for Pressure Piping, B31 | 978-0-7918-7024-2 | 2016 |
| ASME B31.5-2010: Refrigeration Piping and Heat Transfer Components | 978-0-7918-3294-3 | 2010 |
| ASME B31.5-2013: Refrigeration Piping and Heat Transfer Components | 978-0-7918-6861-4 | 2013 |
| ASME B31.5-2016: Refrigeration Piping and Heat Transfer Components: ASME Code for Pressure Piping, B31 | 978-0-7918-7074-7 | 2016 |
| ASME B31.8-2014: Gas Transmission and Distribution Piping Systems | 978-0-7918-6949-9 | 2014 |
| ASME B31.8-2016: Gas Transmission and Distribution Piping Systems: ASME Code for Pressure Piping, B31 | 978-0-7918-7121-8 | 2016 |
| ASME B31.8S-2004: Managing System Integrity of Gas Pipelines | 978-0-7918-2930-1 | 2008 |
| ASME B31.9-2014: Building Services Piping | 978-0-7918-6923-9 | 2014 |
| ASME B31.9-2017: Building Services Piping: ASME Code for Pressure Piping, B31 | 978-0-7918-7174-4 | 2017 |
| ASME B31.12-2014: Hydrogen Piping and Pipelines | 978-0-7918-6960-4 | 2015 |
| ASME B31G-2012: Manual for Determining the Remaining Strength of Corroded Pipelines | 978-0-7918-3448-0 | 2012 |
| ASME B31J-2017: Stress Intensification Factors , Flexibility Factors , and Their Determination for Metallic Piping Components | 978-0-7918-7150-8 | 2017 |
| ASME B31P-2017: Heat Treatments for Fabrication Processes | 978-0-7918-7187-4 | 2018 |
| ASME B31Q-2014: Pipeline Personnel Qualification | 978-0-7918-6931-4 | 2014 |
| ASME B31Q-2016: Pipeline Personnel Qualification: ASME Code for Pressure Piping, B31 | 978-0-7918-7111-9 | 2016 |
| ASME B31T-2010: Standard Toughness Requirements for Piping | 978-0-7918-3296-7 | 2010 |
| ASME B31T-2016: Standard Toughness Requirements for Piping | 978-0-7918-7068-6 | 2016 |
| ASME B36.10M-2004: Welded and Seamless Wrought Steel Pipe | 978-0-7918-2916-5 | 2008 |
| ASME B36.10M-2015: Welded and Seamless Wrought Steel Pipe | 978-0-7918-7027-3 | 2015 |
| ASME B36.10M-2018: Welded and Seamless Wrought Steel Pipe | 978-0-7918-7216-1 | 2018 |
| ASME B40.100-2013: Pressure Gauges and Gauge Attachments | 978-0-7918-6877-5 | 2013 |
| ASME B47.1-2007: Gage Blanks | 978-0-7918-3043-7 | 2008 |
| ASME B73.2-2003: Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for | 978-0-7918-2865-6 | 2008 |
| ASME B73.2-2016: Specification for Vertical In-Line Centrifugal Pumps for Chemical Process | 978-0-7918-7134-8 | 2017 |
| ASME B73.3-2003: Specification for Sealless Horizontal End Suction | 978-0-7918-2853-3 | 2008 |
| ASME B89.1.7-2009: Performance Standard for Steel Measuring Tapes | 978-0-7918-3219-6 | 2009 |
| ASME B89.1.8-2011: Performance Evaluation of Displacement-Measuring Laser Interferometers | 978-0-7918-3372-8 | 2012 |
| ASME B89.1.10M-2001: Dial Indicators | 978-0-7918-2711-6 | 2002 |
| ASME B89.1.13-2013: Micrometers | 978-0-7918-6858-4 | 2013 |
| ASME B89.1.14-2018: Calipers | 978-0-7918-7206-2 | 2018 |
| ASME B89.3.4-2010: Axes of Rotation: Methods for Specifying and Testing | 978-0-7918-3211-0 | 2010 |
| ASME B89.3.7-2013: Granite Surface Plates | 978-0-7918-6869-0 | 2013 |
| ASME B89.4.22-2004: Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines | 978-0-7918-2940-0 | 2005 |
| ASME B89.4.10360.2-2008: Acceptance Test and Reverification Test for Coordinate Measuring Machines Part 2: CMMs Used for Measuring Linear Dimensions | 978-0-7918-3154-0 | 2008 |
| ASME B89.7.2-2014: Dimensional Measurement Planning | 978-0-7918-6943-7 | 2014 |
| ASME B94.9-2008: Taps: Ground Thread With Cut Thread Appendix | 978-0-7918-3148-9 | 2009 |
| ASME B107.4-2005: Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools | 978-0-7918-2976-9 | 2005 |
| ASME B107.100-2010: Flat Wrenches | 978-0-7918-3293-6 | 2010 |
| ASME B107.110-2012: Socket Wrenches, Handles, and Attachments | 978-0-7918-3446-6 | 2013 |
| ASME B107.300-2010: Torque Instruments: Torque Instruments | 978-0-7918-3201-1 | 2010 |
| ASME B107.400-2008: Striking Tools | 978-0-7918-3156-4 | 2009 |
| ASME B107.410-2008: Struck Tools: Incorporation of ASME B107.43, ASME B107.44, ASME B107.46, ASME B107.48, ASME B107.49, ASME B107.50, ASME B107.52, and ASME B107.59 | 978-0-7918-3115-1 | 2008 |
| ASME B107.500-2010: Pliers | 978-0-7918-3325-4 | 2011 |
| ASME B107.600-2008: Screwdrivers | 978-0-7918-3161-8 | 2008 |
| ASME B107.600-2016: Screwdrivers and Screwdriver Bits | 978-0-7918-7116-4 | 2016 |
| ASME B133.8-2011: Gas Turbine Installation Sound Emissions | 978-0-7918-3376-6 | 2012 |
| ASME BPE-2014: Bioprocessing Equipment | 978-0-7918-6941-3 | 2014 |
| ASME BPE-2016: Bioprocessing Equipment | 978-0-7918-7117-1 | 2016 |
| ASME BTH-1-2017: Design of Below-the-Hook Lifting Devices: Design of Below-the-Hook Lifting Devices | 978-0-7918-7135-5 | 2017 |
| ASME CSD-1-2012: Controls and Safety Devices for Automatically Fired Boilers | 978-0-7918-3410-7 | 2012 |
| ASME CSD-1-2015: Controls and Safety Devices for Automatically Fired Boilers: Controls and Safety Devices for Automatically Fired Boilers | 978-0-7918-7056-3 | 2016 |
| ASME CSD-1-2018: Controls and Safety Devices for Automatically Fired Boilers | 978-0-7918-7214-7 | 2018 |
| ASME EA-4-2010: Energy Assessment for Compressed Air Systems | 978-0-7918-3281-3 | 2010 |
| ASME EA-4G-2010: Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems | 978-0-7918-3329-2 | 2011 |
| ASME HST-1-2012: Performance Standard for Electric Chain Hoists | 978-0-7918-3447-3 | 2012 |
| ASME HST-1-2017: Performance Standard for Electric Chain Hoists | 978-0-7918-7190-4 | 2018 |
| ASME HST-2-2014: Performance Standard for Hand Chain Manually Operated Chain Hoists | 978-0-7918-6932-1 | 2014 |
| ASME HST-3-2017: Performance Standard for Lever Hoists | 978-0-7918-7140-9 | 2017 |
| ASME HST-4-2016: Performance Standard for Overhead Electric Wire Rope Hoists | 978-0-7918-7064-8 | 2016 |
| ASME HST-5-2014: Performance Standard for Air Chain Hoists | 978-0-7918-6925-3 | 2014 |
| ASME HST-6-2015: Performance Standard for Air Wire Rope Hoists | 978-0-7918-7058-7 | 2015 |
| ASME MFC-3M-2004: Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | 978-0-7918-2928-8 | 2003 |
| ASME MFC-5.1-2011: Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | 978-0-7918-3347-6 | 2011 |
| ASME MFC-5.3-2013: Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters | 978-0-7918-6870-6 | 2013 |
| ASME MFC-6-2013: Measurement of Fluid Flow in Pipes Using Vortex Flowmeters | 978-0-7918-6854-6 | 2013 |
| ASME MFC-7-2016: Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles | 978-0-7918-7054-9 | 2016 |
| ASME MFC-16-2014: Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters | 978-0-7918-6920-8 | 2014 |
| ASME MFC-19G-2008: Wet Gas Flowmetering Guideline | 978-0-7918-3129-8 | 2008 |
| ASME MFC-21.1-2015: Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers | 978-0-7918-7020-4 | 2015 |
| ASME MFC-21.2-2010: Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters | 978-0-7918-3308-7 | 2011 |
| ASME MFC-26-2011: Measurement of Gas Flow by Bellmouth Inlet Flowmeters | 978-0-7918-3355-1 | 2011 |
| ASME NOG-1-2010: Rules for Construction of Overhead and Gantry Cranes | 978-0-7918-3275-2 | 2010 |
| ASME NOG-1-2015: Rules for Construction of Overhead and Gantry Cranes | 978-0-7918-6966-6 | 2015 |
| ASME NQA-1-2012: Quality Assurance Requirements for Nuclear Facility Applications | 978-0-7918-3489-3 | 2013 |
| ASME NQA-1-2015: Quality Assurance Requirements for Nuclear Facility Applications | 978-0-7918-6956-7 | 2015 |
| ASME NQA-1-2017: Quality Assurance Requirements for Nuclear Facility Applications | 978-0-7918-7159-1 | 2018 |
| ASME NTB-1-2013: Training Program Reference Material for Use with ASME/ANS RA-Sa-2009 | 978-0-7918-6875-1 | 2013 |
| ASME NUM-1-2016: Rules for Construction of Cranes, Monorails, and Hoists | 978-0-7918-7067-9 | 2016 |
| ASME OM-2012: Operation and Maintenance of Nuclear Power Plants | 978-0-7918-6853-9 | 2013 |
| ASME OM-2015: Operation and Maintenance of Nuclear Power Plants | 978-0-7918-6970-3 | 2015 |
| ASME OM-2017: Operation and Maintenance of Nuclear Power Plants | 978-0-7918-7141-6 | 2017 |
| ASME P30.1-2014: Planning for Load Handling Activities | 978-0-7918-6913-0 | 2014 |
| ASME PALD-2005: Safety Standard for Portable Automotive Lifting Devices | 978-0-7918-2981-3 | 2006 |
| ASME PALD-2009: Safety Standard for Portable Automotive Lifting Devices | 978-0-7918-3288-2 | 2010 |
| ASME PASE-2014: Safety Standard for Portable Automotive Service Equipment | 978-0-7918-6968-0 | 2014 |
| ASME PCC-1-2013: Guidelines for Pressure Boundary Bolted Flange Joint Assembly | 978-0-7918-6890-4 | 2013 |
| ASME PCC-2-2015: Repair of Pressure Equipment and Piping | 978-0-7918-6959-8 | 2015 |
| ASME PCC-3-2007: Inspection Planning Using Risk-Based Methods | 978-0-7918-3128-1 | 2008 |
| ASME PCC-3-2017: Inspection Planning Using Risk-Based Methods | 978-0-7918-7179-9 | 2017 |
| ASME POM 101-2013: Performance-Related Outage Inspections | 978-0-7918-6872-0 | 2014 |
| ASME POM 102-2014: Operating Walkdowns of Power Plants | 978-0-7918-6948-2 | 2015 |
| ASME PTB-3-2013: ASME Section VIIIùDivision 2 Example Problem Manual | 978-0-7918-6901-7 | 2013 |
| ASME PTB-5-2013: BPVC - ASME Section VIII - Division 3 Example Problem Manual | 978-0-7918-6881-2 | 2013 |
| ASME PTB-6-2013: Guidelines for Strain Gaging of Pressure Vessels Subjected to External Pressure Loading in the PVHO-1 Standard | 978-0-7918-6902-4 | 2013 |
| ASME PTB-7-2014: Criteria for Shell-and-Tube Heat Exchangers According to Part UHX of ASME Section VIII - Division 1 | 978-0-7918-6945-1 | 2014 |
| ASME PTB-8-2014: Procurement Guidelines for Metallic Materials | 978-0-7918-6947-5 | 2014 |
| ASME PTB-9-2014: ASME Pipeline Standards Compendium | 978-0-7918-7007-5 | |
| ASME PTC 19.3 TW-2016: Thermowells: Performance Test Codes | 978-0-7918-7043-3 | 2016 |
| ASME PTC 19.5-2004: Flow Measurement: Performance Test Codes | 978-0-7918-2763-5 | 2005 |
| ASME PTC 34-2017: Waste Combustors with Energy Recovery | 978-0-7918-7143-0 | 2017 |
| ASME PTC 40-2017: Flue Gas Desulfurization Units | 978-0-7918-7157-7 | 2018 |
| ASME PTC PM-2010: Performance Monitoring Guidelines for Power Plants - Performance Test Codes: Performance Test Codes | 978-0-7918-3198-4 | 2010 |
| ASME PVHO-1-2016: Safety Standard for Pressure Vessels for Human Occupancy | 978-0-7918-7073-0 | 2016 |
| ASME PVHO-2-2012: Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines | 978-0-7918-6851-5 | 2013 |
| ASME PVHO-2-2016: Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines | 978-0-7918-7071-6 | 2016 |
| ASME QAI-1-2005: Qualifications for Authorized Inspection | 978-0-7918-2969-1 | 2008 |
| ASME QAI-1-2010: Qualifications for Authorized Inspection | 978-0-7918-3210-3 | 2010 |
| ASME QAI-1-2016: Qualifications for Authorized Inspection | 978-0-7918-7070-9 | 2016 |
| ASME QEI-1-2010: Standard for the Qualification of Elevator Inspectors | 978-0-7918-3286-8 | 2010 |
| ASME QEI-1-2013: Standard for the Qualification of Elevator Inspectors | 978-0-7918-6884-3 | 2013 |
| ASME QME-1-2012: Qualification of Active Mechanical Equipment Used in Nuclear Facilities | 978-0-7918-3443-5 | 2013 |
| ASME RAM-1-2013: Reliability, Availability, and Maintainability of Equipment and Systems in Power Plants | 978-0-7918-6900-0 | 2013 |
| ASME RAM-2-2016: Reliability, Availability, and Maintainability Program Development Process for Existing Power Plants | 978-0-7918-7137-9 | 2017 |
| ASME RA-S-2008: ASME/ANS RA-S-2008, Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications | 978-0-7918-3140-3 | 2008 |
| ASME RT-1-2009: Safety Standard for Structural Requirements for Light Rail Vehicles | 978-0-7918-3215-8 | 2009 |
| ASME RT-1 - 2015: Safety Standard for Structural Requirements for Light Rail Vehicles | 978-0-7918-7033-4 | 2015 |
| ASME RT-2-2014: Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles | 978-0-7918-6919-2 | 2014 |
| ASME RTP-1-2017: Reinforced Thermoset Plastic Corrosion-Resistant Equipment | 978-0-7918-7170-6 | 2017 |
| ASME STP-NU-001-2005: Risk Initiatives in ASME Nuclear Codes and Standards | 978-0-7918-2975-2 | 2018 |
| ASME STP-NU-009-2008: Graphite for High Temperature Gas-Cooled Nuclear Reactors | 978-0-7918-3176-2 | 2018 |
| ASME STP-NU-044-2011: Non Destructive Examination (NDE) and In-Service Inspection Technology for High Temperature Reactors | 978-0-7918-3412-1 | 2017 |
| ASME STP-NU-057-2013: ASME Code Development Roadmap for HDPE Pipe in Nuclear Service | 978-0-7918-6871-3 | |
| ASME STP-NU-059-2013: Corrections to Stainless Steel Allowable Stresses | 978-0-7918-6896-6 | 2017 |
| ASME STP-NU-063-2013: Correct and Extend Allowable Stress Values for 304 and 316 Stainless Steel | 978-0-7918-6906-2 | 2017 |
| ASME STP-NU-069-2014: Analysis of Selected Nondestructive Examination Methodologies for the Assessment of Cracking in Concrete Containments | 978-0-7918-6937-6 | 2017 |
| ASME STP-PT-003-2005: Hydrogen Standardization Interim Report for Tanks, Piping, and Pipelines | 978-0-7918-2992-9 | 2018 |
| ASME STP-PT-004-2005: Impregnated Graphite for Pressure Vessels | 978-0-7918-3001-7 | 2018 |
| ASME STP-PT-005-2006: Design Factor Guidelines for High-Pressure Composite Hydrogen Tanks | 978-0-7918-3038-3 | 2017 |
| ASME STP-PT-007-2006: Comparison of Pressure Vessel Codes: ASME Section VIII & EN13445 | 978-0-7918-3093-2 | 2017 |
| ASME STP-PT-011-2008: Integrity Management of Stress Corrosion Cracking in Gas Pipeline High Consequence Areas | 978-0-7918-3183-0 | 2017 |
| ASME STP-PT-017-2008: Properties for Composite Materials in Hydrogen Service | 978-0-7918-3179-3 | 2018 |
| ASME STP-PT-023-2009: Guidelines for In-Service Inspection of Composite Pressure Vessels | 978-0-7918-3208-0 | 2017 |
| ASME STP-PT-024-2008: Development of Basic Time-Dependent Allowable Stresses for Creep Regime in Section VIII, Divison 1 | 978-0-7918-3189-2 | 2017 |
| ASME STP-PT-034-2011: Alignment of Sustained Load Stress Indices in the ASME B31 Code | 978-0-7918-3413-8 | 2017 |
| ASME STP-PT-043-2010: ASME Flawed Cylinder Testing | 978-0-7918-3353-7 | 2016 |
| ASME STP-PT-049-2012: Investigation of Temperature Derating Factors for High-Strength Line Pipe | 978-0-7918-3426-8 | 2017 |
| ASME STP-PT-064-2013: Evaluation of Fracture Properties Test Methods for Hydrogen Service | 978-0-7918-6903-1 | 2017 |
| ASME STP-PT-071-2014: Stress Intensity Factor Solutions for Internal Cracks in Thick-Walled Cylinder Vessels | 978-0-7918-6957-4 | 2017 |
| ASME STP-PT-075-2015: Effect of Thickness on the Transformation Behavior of Grade 91 Steel | 978-0-7918-7036-5 | 2017 |
| ASME STP-PT-080-2016: Development of Average Isochronous Stress-Strain Curves and Equations and External Pressure Charts and Equations for 9Cr-1Mo-V Steel | 978-0-7918-7124-9 | 2016 |
| ASME STP-PT-086-2017: Effects of High Temperatures and Fit-Up of Riveted Joints on Steel Rivets | 978-0-7918-7194-2 | 2017 |
| ASME STP-PT-088-2017: Effect of Cooling Rate on the Microstructure and Properties of Duplex Stainless Steel Welds | 978-0-7918-7195-9 | 2017 |
| ASME STP-SA-030-2009: Comparison of FEM Storage/Retrieval Machine Documents to the ASME B30.13 Specification | 978-0-7918-3268-4 | 2017 |
| ASME STS-1-2011: Steel Stacks | 978-0-7918-3345-2 | 2011 |
| ASME STS-1-2016: Steel Stacks | 978-0-7918-7112-6 | 2017 |
| ASME TDP-1-2013: Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fueled Plants | 978-0-7918-6860-7 | 2013 |
| ASME TDP-2-2012: Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants | 978-0-7918-3409-1 | 2012 |
| ASME TR A17.1-8.4-2013: Guide for Elevator Seismic Design | 978-0-7918-6878-2 | 2014 |
| ASME VV 10.1-2012: An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics | 978-0-7918-3415-2 | 2012 |
| ASME Y14.1-2012: Decimal Inch Drawing Sheet Size and Format: Engineering Drawing and Related Documentation Practices | 978-0-7918-3485-5 | 2013 |
| ASME Y14.1M-2012: Metric Drawing Sheet Size and Format | 978-0-7918-3486-2 | 2013 |
| ASME Y14.2-2008: Line Conventions and Lettering | 978-0-7918-3168-7 | 2008 |
| ASME Y14.2-2014: Line Conventions and Lettering | 978-0-7918-6971-0 | 2015 |
| ASME Y14.3-2012: Orthographic and Pictorial Views: Engineering Drawing and Related Documentation Practices | 978-0-7918-6850-8 | 2013 |
| Asme Y14.5-2009 Dimensioning and Tolerancing: Engineering Drawing and Related Documentation Practices | 978-0-7918-3192-2 | 2009 |
| ASME Y14.5-2018: Dimensioning and Tolerancing: 8.2 | 978-0-7918-7219-2 | 2019 |
| ASME Y14.6-2001: Screw Thread Representation | 978-0-7918-2744-4 | 2002 |
| ASME Y14.8-2009: Castings, Forgings, and Molded Parts: Engineering Drawing and Related Documentation Practices | 978-0-7918-3212-7 | 2009 |
| ASME Y14.24-2012: Types and Applications of Engineering Drawings: Engineering Drawing and Related Documentation Practices | 978-0-7918-3487-9 | 2013 |
| ASME Y14.31-2014: Undimensioned Drawings | 978-0-7918-6930-7 | 2014 |
| ASME Y14.34-2013: Associated Lists | 978-0-7918-7248-2 | 2018 |
| ASME Y14.34-2013: Associated Lists: Engineering Drawing and Related Documentation Practices | 978-0-7918-6912-3 | 2014 |
| ASME Y14.35-2014: Revision of Engineering Drawings and Associated Documents: Engineering Drawing and Related Documentation Practices | 978-0-7918-6928-4 | 2014 |
| ASME Y14.37-2012: Composite Part Drawings: Engineering Drawing and Related Documentation Practices | 978-0-7918-3417-6 | 2012 |
| ASME Y14.38-2007: Abbreviations and Acronyms for Use on Drawings and Related Documents: Engineering Drawing and Related Documentation Practices | 978-0-7918-3122-9 | 2008 |
| ASME Y14.41-2012: Digital Product Definition Data Practices: Engineering Drawing and Related Documentation Practices | 978-0-7918-3407-7 | 2012 |
| ASME Y14.43-2011: Dimensioning and Tolerancing Principles for Gages and Fixtures | 978-0-7918-3348-3 | 2011 |
| ASME Y14.44-2008: Reference Designations for Electrical and Electronics Parts and Equipment: Engineering Drawing and Related Documentation Practices | 978-0-7918-3153-3 | 2008 |
| ASME Y14.47-2019: Model Organization Practices: 8.2 | 978-0-7918-7176-8 | 2019 |
| ASME Y14.100-2013: Engineering Drawing Practices | 978-0-7918-3484-8 | 2013 |
| ASME Y14.100-2017: Engineering Drawing Practices: Engineering Product Definition and Related Documentation Practices | 978-0-7918-7169-0 | 2017 |
| Gas Transmission and Distribution Piping Systems: ASME Code for Pressure Piping, B31, 2010 | 978-0-7918-3284-4 | 2010 |
| Power Piping ASME B31-1 2007, revision of ASME B31-1 2004 | 978-0-7918-3084-0 | 2007 |
| Process Piping Asme Code For Pressure Piping, B31 | 978-0-7918-3040-6 | 2007 |
| Small Plant Management | 978-0-07-001534-0 | 1960 |